PLEASE NOTE: The picture is not showing the latest version of our Buffer tube! All our rifles are shipped with a MilSpec tube. Also, our latest version of the solid tube set comes with a MilSpec tube!
>Amplifies every AR15 model
> Including solid sleeve sling holder, Multi-wire Buffer Spring and Carbine Buffer
> Enlarged control panels on both sides for quick loading
> Gas relief areas
> Locking surfaces made of aluminium – No damage to the upper possible
> Modern design
> Ideal for sport and dynamic shooting
> Guarantees ignition safety with all types of ammunition
> Easy installation in all Mil-spec lowers
> The non-adjustable Two-Stage Trigger has a total trigger weight of about 2,040 g
> The detent is far away from the gas hole (low risk of carbon built-up)
> Well audible and perceptible detent with 20 positions
> Gas vent holes to prevent the adjusting screw from getting dirty, also known as gas bleed-out
> Material 42CrMo4, surface hardened
> The detent is far away from the gas hole (low risk of carbon built-up)
> Well audible and perceptible detent with 20 positions
> Gas vent holes to prevent the adjusting screw from getting dirty, also known as gas bleed-out
> Material 42CrMo4, surface hardened
> It can be mounted with standard AR15 tools
> Designed to reduce the recoil as well as the muzzle rise to a maximum
> The steel compensator is practically indestroyable by heat, wear and corrosion
> Achieve up to 50% recoil reduction
> It can be mounted with standard AR15 tools
> Designed to reduce the recoil as well as the muzzle rise to a maximum
> The steel compensator is practically indestroyable by heat, wear and corrosion
> Achieve up to 50% recoil reduction
